1. First login to your scatter account

2. Then go to  eostoolkit.io

3. You’re scatter wallet should pop up and you should accept

4. Then you will see a number of air grabs . Click on trybe one

5.If it fails you have to connect to Scatter Load Balancer https://nodes.get-scatter.com:443

6.Under your account name on the left-hand side click it and you should see a few subheadings one is “connect to network” you will notice below that there are a few items that have to be checked off and it’s done automatically Everything has to be a checkmark

7. Go to the air grab click on trybe one  Scatter app should pop up you should accept  it and hopefully not get a rejection

8. You might have to try a number of times Play around with it and eventually you’ll get it

That was my experience .Also if you know anyone that has experienced in doing the air grabs  reach out to them

Once you get it you’ll have no problem doing it again, most likely.

I was assisted with an admin from Scatter to succeed in completing the air grab. The admin gets a  5 star***** rating!

Thank you Scatter Admin👍👏👏👏😊

Good luck! 😊

35 votes, average: 4.51 out of 535 votes, average: 4.51 out of 535 votes, average: 4.51 out of 535 votes, average: 4.51 out of 535 votes, average: 4.51 out of 5 (35 votes, average: 4.51 out of 5)
You need to be a registered member to rate this.
(2314 total tokens earned)
Loading...

Responses